DESCRIPTION:

An FSX compatible engine smoke system for the 
Tim Conrad freeware Morane Saulnier MS-760, 
which you must have previously installed in FSX.
Easy installation. By Tom Tiedman

CREDITS:

1.) Tim Conrad for his wonderful freeware MS-760.
2.) The original author of the "fx_smoke_f6"
    file, whoever you are.
3.) I just juggled some numbers. As per usual... 
    no big whoop.

Tom Tiedman
thomastiedman@msn.com

INSTALLATION: Simple!

1.) (NOTE: I use Tim Conrad's MS-760 in FSX-SP2, where 
    Tim's sound does not work, so I substituted 
    the default Lear 45 sound file in my sim, 
    which sounds quite nice for this little jet.)

2.) Copy and paste the enclosed "fx_smoke_f6" file
    into your FSX "Effects" folder. (It is probably 
    there already).

3.) Open Tim Conrad's "aircraft.cfg" file and find
    the section marked [SMOKESYSTEM]. Notice it is 
    all alone with no other information listed in it.
    Erase it. If you don't, when you install the new 
    [SMOKESYSTEM] info. found below, it will not work.

4.) Copy and paste all of the enclosed [SMOKESYSTEM] 
    info. below back into the "aircraft.cfg" file. I
    pasted mine at the bottom with good results. 
    Then click 'file', then click 'save', of course.

5.) Press your "I" key while flying your MS-760 in FSX
    and enjoy the smokey engines! 

[SMOKESYSTEM]
smoke.0=-11.732, -1.306, -.801, fx_smoke_f6 
smoke.1=-11.732, 1.306, -.801, fx_smoke_f6 

